Lirc returns previous remote key when pressing new key

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Lirc returns previous remote key when pressing new key

danitool
Scenario: LIRC installed in a MIPS machine, using audio_alsa driver with lircd 0.9.2a
When I press a key on the remote, irw reads it correctly, but most times it get it
repeated and when pressing another key it still returns the previous key.

Example:
                                                    <-- button 1 pressed, nothing shown
000000037ff07bfe 00 1 mceusb <-- button 2 pressed
000000037ff07bfd 00 2 mceusb
000000037ff07bfd 00 2 mceusb <-- button 3 pressed
000000037ff07bfc 00 3 mceusb
000000037ff07bfc 00 3 mceusb <-- button 4 pressed continously
000000037ff07bfb 00 4 mceusb
000000037ff07bfb 01 4 mceusb
000000037ff07bfb 02 4 mceusb
000000037ff07bfb 03 4 mceusb
000000037ff07bfb 00 4 mceusb <-- button 5 pressed
000000037ff07bfa 00 5 mceusb
...........

I built the version 0.9.3a with the same result. But the old version 0.9.0 works
quite fine.

It's like if the data got buffered somewhere, and triggered with when pressing
keys on the remote.

Any clue about this issue?

Regards
Daniel.


------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
Loading...